Precautions For Installing Surge Protector

1. Before installing the surge protector, be sure to disconnect the power supply to avoid electric shock accidents.

2. When installing the SPD, ensure that the total length of the wiring does not exceed 0.5 meters, or use Kevin's wiring method.

3. During the installation process, select the appropriate connection wire diameter according to the level of the SPD.

4. When wiring, pay attention to the fixation of the wiring terminals to ensure that the connection is firm and stable, and avoid problems such as poor contact.

5. The SPD must ensure sufficient grounding, otherwise it will not play a role in lightning protection even if the SPD is installed.

In summary, through this article we understand the wiring method of the surge protector and the wiring diagram provided, and hope to help you install the surge protector correctly. In order to ensure the safe operation of electrical equipment, it is recommended to operate in accordance with the instructions and relevant standards to ensure that the wiring is correct and reliable.